亚洲片在线看_欧美最爽乱婬视频免费看_97自拍碰碰碰视频_日日夜夜天天草_99ri?V国产精品无码_亚洲美女午夜福利码在线播放_五月天开心网_12至16末成年毛片高清_高h肉各种姿势gif动态图_国产又黄又爽又硬视频区一区二

Hotline: +86-021-57278880
Language:   
Your current location: ProductsRegulating ValveElectronic Electric Sleeve Regulating Valve

ZDLM Electronic Electric Sleeve Regulating Valve

Product overview

Product model: ZDLM
Nominal diameter: DN25~300mm
Nominal pressure: ANSI 125~600;JIS 10 ~ 40 k;PN1.6 ~ 6.4 MPa
Main material: cast steel (ZG230-450), cast stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16) titanium, etc
Drive mode: electric
Design standard: GB/T17213
Inspection standard: GB/T4213 flange standard: JIS B220, JB/T79, ANSI B16.5-1981, GB/T9113, HG20594-97, HG20618-97, etc

ZDLM Electronic Electric Sleeve Regulating Valve product details

ZDLM Electronic Electric Sleeve Regulating Valve produced and sold by Baigang valve group is composed of PS series and 3610 series direct stroke electric actuators and low flow resistance straight through single seat valve (can also be matched with other brands direct stroke actuators).Electric actuator is an electronic integrated structure, with servo amplifier, input control signal (4-20MADC or 1-5VDC) and power supply can control the valve opening, to achieve the adjustment of pressure, flow, liquid level, temperature and other industrial parameters.It has the characteristics of sensitive action, simple connection, large flow, small volume and high adjustment precision.The control precision and performance are better than that of DKZ.

Single-seat valve for leakage on the strict requirements of the valve before and after the low pressure and a certain viscosity of the occasion. Widely used in electric power, metallurgy, chemical industry, petroleum, environmental protection, light industry, equipment and other industries.


ZDLM Electronic Electric Sleeve Regulating Valve main technical parameters 

model Rated output force N Speed mm / s Technical Parameters
PSL 361L PSL 361L PSL 361L PSL 361L
201 361LSA-08 
361LXA-08
1000 800 
800
0.25 4.2 
4.2
Power: AC220V 50Hz 
Input signal: DC4-20mA 
DC1-5V 
(signal line shielded cable)  
Output signal: DC4 ~ 20mA 
Protection class: IP67 
With hand wheel 
Power: AC220V 50Hz 
Input signal: DC4-20mA 
DC1-5V 
(signal line shielded cable)  
Output signal: DC4 ~ 20mA 
Protection class: quite IP55 
Flameproof mark: ExdⅡBT4 
with handle
202 361LSA-20 
361LXA-20
2000 2000 
2000
0.50 2.1 
2.1
204 361LSB-30 
361LXB-30
4500 3000 
3000
0.50 3.5 
3.5
208 361LSB-50 
361LXB-50
8000 5000 
5000
1.00 1.7 
1.7
312 361LSC-65 12000 6500 0.60 2.8
325 361LSC-99 25000 10000 1.0 2.0


ZDLM Electronic Electric Sleeve Regulating Valve performance indicators 

project Index value
Basic error% With 361L 2.0; with PSL 0.1
Backlash% 2.5
dead zone% 1.0
Always point deviation% Electricity Start point ± 2.5
end ± 2.5
Power off Start point ± 2.5
end ± 2.5
Adjustable range 30: 1
Rated travel deviation% 2.5
Allowable discharge L / H Single seal in line with JB / T7387-94 Class IV less than the rated capacity of the valve × 10-4 
double seal with JB / T7387-94 Ⅲ level less than the rated capacity of the valve × 10-3


ZDLM Electronic Electric Sleeve Regulating Valve allowable differential pressure

Nominal diameter (mm) 25 40 50 65 80 100 150 200 250 300
Seat diameter (mm) 25 32 40 50 65 80 100 125 150 200 250 300
Execution agency Allowable pressure difference △ P (MPa)
With PSL PSL202 6.4 
3.14
6.4 
1.92
6.4 
1.23
5.1 
0.78
PSL204 4.31 2.76 1.76 6.4 
1.04
6.4 
0.69
5.62 
0.44
PSL208 1.86 1.23 0.78 6.4 
0.50
5.31 
0.35
3.97 
0.20
PSL320 1.26
0.87 0.49 6.4 
0.32
4.14 
0.22
With 361L 361LSA-20 6.4 
3.14
6.4 
1.92
6.4 
1.23
6.4 
0.78
361LSB-50 6.4 
1.16
6.4 
0.76
6.25 
0.49
361LSC-65 6.4 
0.64
4.32 
0.41
3.23 
0.28
361LSC-99 0.63 0.44 0.25 3.31 
0.16
0.27 
0.11

Note: 
 1, the same grid on the row for the double-sealed type allows the pressure difference, the lower row is a single sealed type to allow pressure. 
 2, the actual configuration needs to be based on specific process parameters. If the pressure difference is not clear or the maximum working pressure is out of the range, please contact us and take appropriate measures to solve it.


ZDLM Electronic Electric Sleeve Regulating Valve dimensions

Nominal diameter (mm) 25 40 50 65 80 100 150 200 250 300
L (mm) PN1.6MPa 184 222 254 276 298 352 451 600 720 820
PN4.0MPa 197 235 267 292 317 368 473 600 760 850
PN6.4MPa 210 251 286 311 337 394 508 650 800 870
H1 (mm) 72 87 92 105 110 127 174 209 300 350
With PSL H (mm) normal type 750 765 767 845 857 875 1025 1045 1252 1545
Heat sink type 900 930 937 1025 1042 1085 1285 1305 1805 1825
D (mm) 176 225
Weight (KG) 23.5 33.5 40.5 69 84 112 189 262 415 635
With 361L H (mm) normal type 513 650 652 770 782 800 1080 1125 1345 1365
Heat sink type 663 815 822 950 967 1010 1340 1385 1625 1645
D (mm) 225 310
Weight (KG) 31 49 56 84 99 127 242 315 463 683


Reminder:

All text, data and pictures in this article are for reference only.To see more details of the ZDLM Electronic Electric Sleeve Regulating Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

+86-021-57278881
qrCode